BRICK PAVERS MUST BE SEALED TO PREVENT FADING

 

Brick pavers must be sealed to prevent fading by National Sealing CO

Pavers that are not sealed annually will fade. Typically it only takes 5-7 years before they will show very noticeable signs of fading. Most people don’t realize this until it’s too late. In the past, the only thing available to restore faded pavers, would be to STAIN the pavers. Staining paver amounts to PAINTING pavers. This is a very un-natural look, and typically lifts with hot tires. The pavers are basically ruined at this point.

Brick pavers must be sealed to prevent fading by National Sealing CO

For this reason, we have developed a DYEING process to restore faded pavers. National Sealing is the largest paver sealing Co in the US and mobilizes across the US and abroad with our patented DYEING Process. Our process not only restores badly faded pavers to almost new looking, but also seals and protects from further fading & staining.

In this example, the account had added new pavers resulting in a very visible difference between the old and the new. We were able to re-dye the old to match the new.

Coating pavers versus sealing – our unique, clear, coating process is 3-5x more durable than common sealers. This can be used to protect limestone, sealing of granite, sealing of travertine, sealing of blue stone, sealing protection for stamped concrete. Our coating process can also be applied to the entire surface to seal ceramic tile & grout, seal porcelain tiles. Our coating process is designed to Preserve, Protect and Prolong your asset life cycle by extending the life expectancy of your property, plus contribute to the ease of maintenance of these surfaces, thereby reducing cleaning costs and preserving the surface material.This specialized process is not available anywhere in the US and must be applied by our trained technicians. No application is too small. For smaller, residential applications, we will package together multiple applications in a given area to make the program work for everyone.

Contact us today to find out how we can protect your faded pavers – 954-577-8837

 

National Sealing Co.
2269 S University Dr., Fort Lauderdale FL 33324
Phone: 954-577-8837
https://www.nationalsealing.com/

Anti Slip for Hotel Floors

National Sealing Co. - 954-577-8837 - have a non slip process applied professionally by

This is an application in an Atlanta hotel. Guests were constantly complaining of the floors being slippery, and there was a liability issue. Many hotels are faced with slippery tiles as well as slippery pool decks and slippery spas. National Sealing is the industry leader in anti slip for hotel floors

 

ANTI SLIP FOR HOTEL FLOORS by National Sealing Company - 954-577-8837 - Our product line includes: conventional sealing, anti slip applications, staining, coloring, dyeing and our patented ‘coating’ process. In addition; epoxy applications, cement overlays, mildew control, anti graffiti and grinding services. ANTI SLIP FOR HOTEL FLOORS by National Sealing Company - 954-577-8837 - Our product line includes: conventional sealing, anti slip applications, staining, coloring, dyeing and our patented ‘coating’ process. In addition; epoxy applications, cement overlays, mildew control, anti graffiti and grinding services.

The options for slippery floors are:

  1. apply a buy-and-apply product from the internet with little to no result or have a non slip process applied professionally. National Sealing mobilizes across the US and abroad.
  2. Sealing the tiles with an anti slip product will be temporary and we have not found many of the internet product claims to be accurate. This compounds the issue, as the trial version of the non slip product must then be removed prior to any proven methods. This of course adds to the cost.

Our process differs substantially. Our NS-200 coating process vs. sealers are more durable and will last longer. Secondly, if a novice handyman can apply a plastic polymer, or sand from a box store that is added to any sealer mix, these particles are very brittle and wear fast. This will also compound the slip problem, as additional applications of sealer will build up, resulting in flaking, peeling etc….

Our solution is our durable three part coating process. We then broadcast nano beads which are very difficult to crush with pedestrian traffic. This results in a very durable and long lasting surface treatment.

Call for an appointment – 954-577-8837 or visit us on line http://www.nationalsealing.com

National Sealing Company
954-577-8837
http://www.nationalsealing.com
Our product line includes: conventional sealing, anti slip applications, staining, coloring, dyeing and our patented ‘coating’ process. In addition; epoxy applications, cement overlays, mildew control, anti graffiti and grinding services.

National Sealing has a Proprietary Non Slip Application

National Sealing has a proprietary non slip application and mobilizes throughout the US and abroad with our durable anti slip process. No other coating process can claim the unique product features and benefits that National Sealing’s coating offers. A coating that will withstand the damaging effects of chemical abuse, abrasion, and ablation, intense heat, ultra-violet light exposures and corrosive degradation.

This is an example of a 5 star hotel that recently renovated. The high end Presidential Suite had porcelain tile that was very slippery. National Sealing was contracted to provide our proprietary non slip application.

National Sealing has a proprietary non slip application National Sealing has a proprietary non slip application National Sealing has a proprietary non slip application There are two components to a non slip application. The first component is what material is being used to adhere to the substrate. Common ‘sealers’ will not adhere to surfaces such as ceramic, porcelain, terrazzo, VCT and various other surfaces. All sealers are temporary and typically will last 1-2 years. National Sealing uses a 3 part ‘coating’ process vs. sealer. Our durable coating is mixed on site, and had hardeners that allow our coating to ‘grip’ to various surfaces that a sealer cannot.

The second phase of an anti slip application is; what media is used as an aggregate to create the non slip profile. A novice applicator would use over the counter products made of very light, brittle silica. Others attempt common play sand. Whereas these aggregates will create a non slip profile, due to the soft materials, they are VERY temporary. The tops of the imbedded media wear out, become shaved off. Re-application then becomes an issue when using the sealer/light aggregate method as layering sealers is not advised. The sealers can dislodge, flake, peel. Each subsequent layer becomes less stable. This creates another future problem of then having to strip the brittle layers of Sealers. National Sealing specializes in non slip applications and has durable nano beads manufactured exclusively for National Sealing. These durable beads compliment our durable three part coating to provide a non slip application unmatched by any company in the U.S.A.

  • Three part coating process versus mono – component sealer for durable adhesion to challenging surfaces
  • Common sealers needing constant re-application. Coating process much more durable
  • Durable non slip media for long term anti slip protection compared to brittle over-the-counter non slip additives.

There exists no other company in the US that has access to, or applies our coatings other than National Sealing’s trained applicators.

National Sealing Company specializes in commercial properties that are exposed to high pedestrian traffic and therefore exposed to litigation. Typically the cost of our application is less than what the attorney’s fee would be aside from what damages are awarded. Our durable non slip application is the most prudent and durable anti slip application that exists. The legal position could then be the establishment has done everything humanly possible to insure proper footing. National Sealing has demonstrated great success with condominiums, hotels, stadiums, office buildings, and municipalities, in protecting those businesses from possible litigation.

National Sealing Co.
2269 S University Dr
Fort Lauderdale, FL 33324
Phone: 954-577-8837
http://www.nationalsealing.com

 

Non Slip Application on Restaurant Porcelain Tile Floors

National Sealing - (954) 577-8837NON SLIP APPLICATION ON RESTAURANT PORCELAIN TILE FLOORS

An upscale restaurant in Baltimore had newly installed porcelain tiles that became slippery from the exhausts that did not capture all of the grease. This was a hibachi restaurant which cooked with flame and over time, the cooking created enough grease on the tiles to make them slippery. They needed a durable non slip application that would not only hold up to heavy foot traffic, but a challenging cleaning regiment.

NON SLIP APPLICATION ON RESTAURANT PORCELAIN TILE FLOORS

National Sealing specializes in non slip applications throughout the US and abroad.

NON SLIP APPLICATION ON RESTAURANT PORCELAIN TILE FLOORS

Our trained applicators apply our specialty multi component coating process combined with specially manufactured nano glass beads for a durable and long lasting solution for anti slip / anti skid occurrences.

NON SLIP APPLICATION ON RESTAURANT PORCELAIN TILE FLOORS

National Sealing Co.
2269 S University Dr., Fort Lauderdale FL 33324
Phone: 954-577-8837
Fax: 954-476-797
http://www.nationalsealing.com

Anti Slip Application for Stamped Concrete by National Sealing

ANTI SLIP APPLICATION - STAMPED CONCRETE - 2014-08-07 18.22.02-600 This customer in New Orleans had a large, newly installed stamped concrete deck. The deck had been sealed by the contractor which created a very slippery surface. A novice attempt was made to apply a sand-type non slip which was quickly worn down. We combine our durable coating process (vs. sealers), and our durable nano grip beads to deliver a long lasting, non slip surface.

Or coating process on average last 4-5 times longer than sealer. This is a three part formula with hardeners that results in durable, long lasting slip protection. Our process is applied by our trained professionals and is not sold. We’ve witnessed sealer processes that combine sealer with shaved plastic or ‘shark grip’ particles. This process is good – however only lasts about 6 months. The tops of the imbedded plastic wears, and you’re left with only a ‘sealed’ surface. This actually compounds the issue and actually makes the surface even more slippery. Our coating process combines small glass beads that are broadcast onto the surface and then ‘locked in’ with a top coat. The result is not only a durable coating, but a durable non slip aggregate as well.

We mobilize throughout the US as well as international applications. Currently we know of no other process that will match the durability and longevity of the coating process combined with our anti slip application.

ANTI SLIP APPLICATION - STAMPED CONCRETE - 2014-08-08 09.34.39-800

National Sealing Co.
2269 S University Dr, Fort Lauderdale FL 33324
Phone: 954-577-8837
http://www.nationalsealing.com

We market and apply a unique, clear, inorganic coating that protects a wide array of different surfaces and is one of the most durable products available today.